UJA1061 Overview
Key Specifications
Package: HTSSOP EP
Mount Type: Surface Mount
Pins: 32
Operating Voltage: 12 V
Description
Fail-safe system controller Fail-safe mode Start-up mode Restart mode Normal mode Standby mode Sleep mode Flash mode On-chip oscillator Watchdog Watchdog start-up behaviour Watchdog window behaviour Watchdog time-out behaviour Watchdog OFF behaviour System reset System reset pin RSTN Enable output pin EN Power supplies Supported battery systems Static and dynamic battery monitoring Voltage regulators V1 and V2 Switched battery output (V3) CAN transceiver Mode control Termination control Bus, RXD and TXD failure detection LIN transceiver Mode control Bus and TXDL failure detection 6.9 6.10 6.11 6.12 6.13 6.14 6.14.1 6.14.2 6.14.3 6.14.4 6.14.5 6.14.6 6.14.7 6.14.8 6.14.9 6.14.10 6.14.11 6.14.12 6.14.13 6.14.14 6.15 6.16 6.16.1 6.16.2 7 8 9 10 11 11.1 11.2 11.3 11.4 11.5 12 13 14 Inhibit output (pin INH) Wake-up input (pin WAKE) Interrupt output Temperature protection SPI interface SPI register mapping Register overview Mode register System status register System diagnosis register Interrupt enable register Interrupt Enable Feedback register Interrupt register System configuration register System Configuration Feedback register Physical Layer Control register Physical layer control feedback register Special Mode register General Purpose registers General Purpose Feedback registers Register configurations at reset Test modes Software development mode.
Key Features
- General System features Fail-safe features CAN physical layer LIN physical layer
