PAS6337 Datasheet | Pixart Imaging

Description The PAS6337 is a highly integrated CMOS active-pixel image sensor that has output of 640 x 480 pixels. It embedded the new Fine Pixel™ sensor technology to perform the excellent image quality. PAS6337 outputs YUV/YCr Cb 4:2:2 or RGB565/555/444 data through the MIPI interface. It is available in CSP-22L package. The PAS6337 can be programmed to set the exposure time for different luminance condition via I2CTM serial control bus. By programming the internal register set, it performs on-chip frame rate adjustment and programmable gain control. Features - Resolution: 640 x 480 pixels, 1/9” Lens - Bayer-RGB color filter array - Output format : z YUV/YCr Cb 4:2:2 z RGB565/555/444 - Continuous variable frame time & exposure time - I2CTM Interface - Support 1.8V/2.8V I/O - Power consumption : operating typical 25m A @ 2.8V (VGA YUV 30fps output, without loading), power-down typical 10u A @ 2.8V - Automatic Background pensation - Black sun cancellation - DSP function : z AEC & AGC z AWB z Gamma z Color matrix z Sharpness z De-noise z Color saturation z Defect pensation z Lens shading pensation z Decimation & WOI z Gesture detection - PLL - Module size : 5.0mm - 5.0mm - MIPI interface (max. 500Mbps) - Support WLL (Wafer Level Lens) Key Specification Resolution Power Analog I/O Core Optical format Pixel Size Lens Chief Ray Angle Sensitivity Color filter Exposure Time Scan Mode S/N Ratio Dynamic range 640 (H) x 480 (V) 2.8V typ. 1.8V/2.8V 1.8V typ. 1/9” Lens 2.5um - 2.5um 23 degree 1900 m V/Lux-Sec RGB Bayer Pattern ~ Frame time to Line time Progressive 39 d B 69 d...