PAS6352 Datasheet | Pixart Imaging

Description The PAS6352 is a highly integrated CMOS active-pixel image sensor that has output of 640 x 480 pixels. It embedded the new Fine Pixel™ sensor technology to perform the excellent image quality. PAS6352 outputs 10-bit RGB raw or YUV/YCr Cb 4:2:2 or RGB565/555/444 data through a parallel data bus. It is available in CSP package. The PAS6352 can be programmed to set the exposure time for different luminance condition via I2CTM serial control bus. By programming the internal register set, it performs on-chip frame rate adjustment and programmable gain control. Features - Active Pixels: 648 x 488 pixels - Resolution: 640 x 480 pixels, 1/4” Lens - Bayer-RGB color filter array - Output format : l RAW, 10-bit l YUV/YCr Cb 4:2:2 l RGB565/555/444 - On-chip 10-bit pipelined A/D converter - On-chip manual analog gain control - Continuous variable frame time & exposure time - I2CTM Interface - Support 1.7V~3.3V I/O - Power dissipation: operating typ. TBD@ 2.8V (VGA YUV 60fps parallel-output, without loading), low power-down dissipation typ./max. TBD @ 2.8V - Automatic Background pensation - ISP function: l AEC & AGC l AWB l Gamma l Color matrix l Sharpness l De-noise l Color saturation l Defect pensation l Lens shading pensation l Auto de-flicker l Decimation-AVG and Scaler l DRC (Dynamic Range pensation) l WOI & Sub-sampling - Dummy line & pixel timing - Output Hsync at Vsync - PLL - Module size : TBD Key Specification Active Pixel Resolution Power Analog I/O Core [ Array diagonal ] Pixel Size Lens Chief Ray Angle Max. Frame rate Max. input clock Max. Pixel clock Sensitivity Color filter Exposure Time Scan Mode S/N Ratio Dynamic range Package 648(H) x 488(V) 640 (H) x 480 (V) 2.8V 1.7V ~...