48IMS30-0503-9G Datasheet | Power-One

IMS30 SERIES Powering munciations and Technology Input to output electric strength test 1500 V DC Input voltage ranges 32...75VDC for -0302 Dual output JAN, 2001 48Vinput Dual outputs 5V & 3.3V ; 3.3V & 1.8V IMS30 Series - Industry standard pin-out - Fixed frequency operation - High efficiency up to 89 % - 2" x 2" platform with 9.4 mm profile - Low output noise - Soft start - Shut down input, output voltages adjustable - Programmable input undervoltage lockout - Synchronisation - Outputs no-load, overload and short-circuit proof - Operating ambient temperature - 40...71 o C - Thermal protection with auto-reset (non latching) - Emissions below EN 55022, level B - Immunity to IEC/EN 61000-4-2,-3,-4,-5 and -6 Safety according to IEC/EN 60950, UL 1950 Approvals pending Summary The IMS 30 series of board mountable 30 Watt DC-DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for applications in industry and telemunication where variable input voltages or high transient voltages are prevalent. Features include efficient input and output filtering with unsurpassed transient and surge protection, low output ripple and noise, consistently high efficiency over the entire input voltage range, high reliability as well as excellent dynamic response to load and line changes. The converters provide supplementary insulation with SELV outputs as e.g. required in battery supported systems where the bus voltage may exceed the SELV limit of 60 V DC. They are designed and built according to the international safety standards IEC/EN 60950, UL 1950, CAN/ CSA C22.2 No.950-95. Approvals pending. The circuit prises integrated planar magnetics and all ponents are automatically assembled and soldered onto a single PCB without any wire connections. The proprietary magnetic feedback solution ensures maximum reliabilityand repeatability in the control loop over all operating conditions....