Datasheet4U Logo Datasheet4U.com

HHS40ZD - 40A Half-Brick DC/DC Converter

Download the HHS40ZD datasheet PDF. This datasheet also covers the HHS40ZD_Power variant, as both devices belong to the same 40a half-brick dc/dc converter family and are provided as variant models within a single manufacturer datasheet.

General Description

The HHS40 is a series of high-density Halfbrick size, High-current, Single-output DC/DC converters with through-hole mounting.

The products provide on-board conversion of standard Telecom and Datacom input voltages to isolated, precisely regulated low output voltages.

Key Features

  • Open frame design with Insulated Metal Substrate Low profile.
  • 12.7 mm height Input/output isolation: 1500VDC, meets basic insulation requirements Efficiency in excess of 90% Output back-drive capability Low conducted and radiated EMI Output over-current protection Output over-voltage protection Over-temperature protection Remote sense Set point accu.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HHS40ZD_Power-One.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number HHS40ZD
Manufacturer Power-One
File Size 67.99 KB
Description 40A Half-Brick DC/DC Converter
Datasheet download datasheet HHS40ZD Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HHS-109 Hybrid Junction Tyco Electronics
HHS-109PIN Hybrid Junction Tyco Electronics
HHS-110 Hybrid Junction Tyco Electronics

Other Datasheets by Power-One

Part Number Description
HHS40ZE 40A Half-Brick DC/DC Converter
HHS60ZA 60A Half-Brick DC/DC Converter
HHS60ZB Half-Brick DC/DC Converter
HHS60ZD 60A Half-Brick DC/DC Converter
HHS60ZE 60A Half-Brick DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Brief HHS40 Series – 40A Half-Brick DC/DC Converter 48V Input 3.3V, 2.5V Output Features • • • • • • • • • • • • • • Open frame design with Insulated Metal Substrate Low profile – 12.7 mm height Input/output isolation: 1500VDC, meets basic insulation requirements Efficiency in excess of 90% Output back-drive capability Low conducted and radiated EMI Output over-current protection Output over-voltage protection Over-temperature protection Remote sense Set point accuracy ± 2% Remote on/off (primary referenced), positive or negative logic Output voltage trim, positive or negative UL 1950 Recognition, CSA 22.2 No.