HHS60ZE Datasheet | Power-One

Product Brief HHS60 Series - 60A Half-Brick DC/DC Converter 48V Input 3.3V, 2.5V, 1,8V, 1.5V, 1.2V Outputs Features - - - - - - - - - - - - - - Open-frame design with Insulated Metal Substrate Low profile - 12.7 mm height Input/output isolation: 1500VDC, meets basic insulation requirements Start-up into high capacitive load Output back-drive capability Low conducted and radiated EMI Output overcurrent protection Output overvoltage protection Overtemperature protection Remote sense Set point accuracy ± 1.0% Remote on/off, positive or negative logic Output trim, positive or negative UL 1950 Recognition, CSA 22.2 No. 950-95 certification, TUV IEC950 Applications - - - - Distributed power architectures Telemunications equipment LAN/WAN applications Data processing applications Description HHS60 single-output DC/DC converters provide up to 60A output current in an industry-standard, half-brick package. This high-density product converts standard tele and data input voltages to regulated, low output voltages. The HHS60's leading-edge technology provides high efficiency. Its thermal design enables delivery of full-rated power at 55°C ambient temperature by using only 200 LFM of forced-air cooling without the need of a heatsink. Selection Chart Model Input voltage VDC 36-75 36-75 36-75 36-75 36-75 Input current max, ADC 5.0 4.9 3.6 3.1 3.1 Output voltage VDC 3.3 2.5 1.8 1.5 1.2 Output current ADC 60 60 60 60 60 Output ripple/noise (mV p-p) 200 200 200 200 200 Typical efficiency 89.0 88.0 86.0 84.0 82.0 HHS60ZE HHS60ZD HHS60ZB HHS60ZA HHS60ZY Page 1 of 2 .power-one. Product Brief HHS60 Series - 60A Half-Brick DC/DC Converter 48V Input 3.3V, 2.5V, 1,8V, 1.5V, 1.2V Outputs Mechanical Drawing Pin # 1 2 3 4 5 6 7 8 9 Function -Vin Case ON/OFF +Vin -Vout...