Datasheet4U Logo Datasheet4U.com

PT2469 - Dual-Bridge Motor Controller

Description

The PT2469 is a monolith integrated motor driver designed for printers, scanners, and home and office automated equipment.

The two H-bridge drivers can drive a bipolar stepper motor or two DC motors.

The output H-bridge driver is consists by all of N-channel MOSFET.

Features

  • 8.2-V to 40-V Supply Voltage Range.
  • 1.6-A Maximum Driving Current at VM=24V (with additional heatsink).
  • EN-PH Control Logic Interface.
  • Dual H-Bridge Driver with 4 Level PWM Current Control.
  • Winding Current Decay Modes - Mixed Decay - Slow Decay - Fast Decay.
  • Drives Single Bipolar Stepping Motor or Dual DC Motors.
  • Built In a 3.3V Reference Voltage Output.
  • Low-Power Sleep Mode.
  • Protection Features - Over Current Protection (OCP) - Thermal Shutdown (TS.

📥 Download Datasheet

Datasheet preview – PT2469

Datasheet Details

Part number PT2469
Manufacturer Princeton Technology
File Size 1.26 MB
Description Dual-Bridge Motor Controller
Datasheet download datasheet PT2469 Datasheet
Additional preview pages of the PT2469 datasheet.

📁 Similar Datasheet

  • PT2464 - 2-CH H-bridge Driver (PTC)
  • PT2468 - 1.8A Low-Voltage H-Bridge Driver (PTC)
  • PT2424-6B - Phototransistor (Everlight)
  • PT2434 - 3-Phase Sensorless BLDC Motor Controller (PTC)
  • PT2480 - 45V/3.6A Brushed DC Motor Driver (PTC)
  • PT2482 - 45V/3.6A Brushed DC Motor Driver (PTC)
  • PT2000 - Programmable solenoid controller (NXP)
  • PT200KN16 - Diode (Nihon Inter Electronics)
  • PT200KN8 - Diode (Nihon Inter Electronics)
  • PT200N - Economical Sealed Control Units (Tyco Electronics)
Other Datasheets by Princeton Technology
  • PT2461 - Infrared Remote Control Transmitters
  • PT2462 - Infrared Remote Control Transmitters
  • PT2465 - Stepping Motor Driver
  • PT2465A - Stepping Motor Driver
  • PT2466 - 1.8A Low-Voltage H-Bridge Driver
  • PT2432 - 3-Phase Sensor-less BLDC Motor Driver
  • PT2470 - 36V/3.6A Brushed DC Motor Driver
  • PT2470C - 36V/3.6A Brushed DC Motor Driver

Full PDF Text Transcription

Click to expand full text
DESCRIPTION The PT2469 is a monolith integrated motor driver designed for printers, scanners, and home and office automated equipment. The two H-bridge drivers can drive a bipolar stepper motor or two DC motors. The output H-bridge driver is consists by all of N-channel MOSFET. The PT2469 is allows driving up to 1.6A maximum output current (VM=24 V, Ta=25°C). An EN-PH type parallel logic control interface can be configuring the output switches ON-OFF of H-bridge, and motor current decay mode is also programming by the parallel input port. The PT2469 is available in a 28-pin HTSSOP package with thermal pad and in a 28-pin QFN package thermal pad.
Published: |