ESOT3.3LC-2 Datasheet | Protek Devices

Only One Name Means Pro T ek’Tion™ LOW CAPACIT ANCE TVS ARRA Y APPLICA TIONS ✔ Ethernet - 10/100 Base T ✔ USB Ports ✔ Cellular Phones ✔ Audio/Video Inputs ✔ Personal Digital Assistant (PDA) ✔ E1/T1 & E3/T3 IEC PA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15k V, Contact - 8k V ✔ 61000-4-4 (EFT): 40A - 5/50ns FEA TURES ✔ ESD Protection > 25 kilovolts ✔ 175 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Protects Two (2) Unidirectional Lines ✔ Unidirectional Configuration ✔ Low Leakage Current < 2.0µA ✔ LOW CAPACITANCE: 15p F PER DIODE ✔ Ro HS pliant on Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SOT-23 Weight 8 milligrams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code SOT-23 PIN CONFIGURA TION 1 3 2 05183.R1 3/05 .protekdevices. DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Current (tp = 8/20µs) Operating Temperature Storage Temperature SYMBOL PPP IPP TJ TSTG VALUE 175 5 -55°C to 150°C -55°C to 150°C UNITS Watts A °C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MINIMUM SNAP BACK VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS ESOT3.3LC-2 E3 3.3 @ 1m A V(BR) VOLTS 3.5 @ ISB = 50m A VSB VOLTS 3.3 @IP = 1A VC VOLTS 6.5 @VWM ID µA 2 @0V, 1MHz C p F 15 Note 1: Test between pins 2 to 3, and 1 to 3. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td =...