PSMF12 Datasheet | Protek Devices

FEATURES ✔ 100 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Available in Multiple Voltages ✔ Up to Four (4) Lines of Protection ✔ ESD Protection > 25 kilovolts ✔ Low Clamping Voltage ✔ Ro HS pliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SC-70-5L Weight 7 milligrams (Approximate) Available in Lead-Free Plating Solder Reflow Temperature: Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 1 2 3 05123.R10 3/07 .protekdevices. PSMF05 thru PSMF24 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Voltage @ 1A, 8/20µs SYMBOL PPP TL TSTG VFP VALUE 100 -55 to 150 -55 to 150 1.5 UNITS Watts °C °C Volts ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE (See Note 1) @ 1m A V(BR) VOLTS 6.0 13.3 16.7 26.7 @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS 9.5 15.0 - MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE VWM VOLTS PSMF05 PSMF12 PSMF15 PSMF24 05 12 15 24 5.0 12.0 15.0 24.0 @8/20µs VC @ IPP 12.0V @ 9.0A 22.0V @ 5.0A 33.0V @ 3.0A 55.5V @ 1.8A @VWM ID µA 10 1 1 1 @0V, 1 MHz CJ p F 60 30 25 20 Note 1: Test between pins 1 to 2, 3 to 2, 4 to 2 and 5 to 2. 10,000 - Peak Pulse Power - Watts FIGURE 1 PEAK PULSE POWER VS PULSE TIME - Peak Pulse Current - % of IPP 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td =...