Datasheet4U Logo Datasheet4U.com

RF2418 - LOW CURRENT LNA/MIXER

General Description

The RF2418 is a monolithic integrated UHF receiver front-end.

The IC contains all of the required components to implement the RF functions of the receiver except for the passive filtering and LO generation.

Key Features

  • Single 3V to 6.5V Power Supply.
  • High Dynamic Range LNA LNA IN 1 GND 2 VDD1 3 VDD2 4 10pF IF BYP 5 IF2 OUT 6 IF1 OUT 7 10 GND 9 DEC MIXER 8 LO IN 14 LNA OUT.
  • Low Current Drain 13 GND 12 GND 11 RF IN.
  • High LO Isolation.
  • LNA Power Down Mode for Large Signals RF AMP BUFFER Ordering Information RF2418 RF2418 PCBA Low Current LNA/Mixer Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, N.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RF2418 8 Typical Applications • UHF Digital and Analog Receivers • Digital Communication Systems • Commercial and Consumer Systems • 433MHz and 915MHz ISM Band Receivers LOW CURRENT LNA/MIXER • Spread-Spectrum Communication Systems • General Purpose Frequency Conversion Product Description The RF2418 is a monolithic integrated UHF receiver front-end. The IC contains all of the required components to implement the RF functions of the receiver except for the passive filtering and LO generation. It contains an LNA (low-noise amplifier), a second RF amplifier, a dualgate GaAs FET mixer, and an IF output buffer amplifier which will drive a 50 Ω load.