RF2603 Datasheet | RF Micro Devices

Description The RF2603 is a upconverter/pre-driver designed for PCS systems. The device features single-ended IF and LO inputs and single-ended RF output for ease of interface. The RF2603 is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process and is packaged in a TSSOP-16 package. 6.50 6.30 4.50 4.30 1.20 MAX 0.30 0.19 5.10 4.90 MIXERS 0.18 Typ. 8° MAX 0° MIN 0.750 0.450 1.05 0.80 1.00 Ref. 0.15 0.05 1.20 MAX Optimum Technology Matching® Applied Si BJT Si Bi-CMOS ü Package Style: TSSOP-16 Ga As HBT Si Ge HBT Ga As MESFET Si CMOS Features - Single Supply 2.8V Operation - +3d Bm Typical Output 1d B pression Point - Power Down Control - 17d B Conversion Gain VCC 1 NC 2 NC 3 GND 4 LO IN 5 GND 6 RF OUT 7 16 TX ENABLE 15 NC 14 IF IN 13 GND 12 VCC 11 GND 10 NC 9 NC Ordering Information RF2603 RF2603 PCBA 2.8V PCS Upconverter Fully Assembled Evaluation Board VCC 8 Functional Block Diagram RF Micro Devices, Inc. 7625 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://.rfmd. Rev A2 010403 6-37 Absolute Maximum Ratings Parameter Supply Voltage Enable Voltage LO Input Power Input IF Power Operating Temperature Range Storage Temperature Rating -0.5 to +5.5 -0.5 to +5.5 +3 +3 -30 to +85 -30 to +150 Unit V V d Bm d Bm °C °C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described product(s). Parameter...