Datasheet4U Logo Datasheet4U.com

RF2608 - CDMA/FM UPCONVERTER/BPSK MODULATOR

General Description

The RF2608 is a complete upconverter designed for CDMA/FM cellular applications.

The IC contains a double-balanced mixer stage and an output buffer amplifier stage.

This device may also be used to directly BPSK modulate a carrier.

Key Features

  • Supports Dual Mode Operation.
  • +7dBm Output Intercept Point.
  • Single 2.7V to 5.0V Power Supply IF+ IFGND LO BYPASS 1 2 3 4 8 7 6 5 RF OUT VCC GND LO.
  • Internally Matched Inputs and Outputs.
  • Buffered Output.
  • Double-Balanced Mixer Ordering Information RF2608 RF2608 PCBA CDMA/FM Upconverter/BPSK Modulator Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RF2001 SAW Filter REYCONNS
RF2001 Fast recovery Diodes Rohm
RF2001NS2D Super Fast Recovery Diode ROHM
RF2001NS2DFH Super Fast Recovery Diode ROHM
RF2001NS3D Fast Recovery Diodes Rohm

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RF2601 GAIN CONTROLLED IF AMPLIFIER
RF2603 2.8V PCS UPCONVERTER
RF2607 CDMA/FM RECEIVE AGC AMPLIFIER
RF2609 CDMA/FM TRANSMIT AGC AMPLIFIER
RF2617 3V CDMA/FM RECEIVE AGC AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RF2608 6 Typical Applications • CDMA/FM Cellular Systems • Supports Dual-Mode AMPS/CDMA • Supports Dual-Mode TACS/CDMA • Commercial and Consumer Systems • Battery-Operated Systems CDMA/FM UPCONVERTER/BPSK MODULATOR Product Description -A- The RF2608 is a complete upconverter designed for CDMA/FM cellular applications. The IC contains a double-balanced mixer stage and an output buffer amplifier stage. This device may also be used to directly BPSK modulate a carrier. The mixer is a Gilbert cell with emitter degeneration resistors to provide high IP3. The output stage is a class-B, push-pull configuration to reduce the overall current and still provide a good 50 Ω output match. The unit operates at a supply voltage of 2.7V to 5.