RF2640 Datasheet | RF Micro Devices

Description The RF2640 is a plete upconverter and power amplifier driver designed for TDMA and CDMA applications. The device features balanced IF inputs, single-ended LO input and RF output for ease of interface. Packaged in an industry standard MSOP-10 package, the device provides a low-cost solution while easing board space limitations. 0.192 0.038 ± 0.006 0.008 0.118 0.004 ± 0.002 0.0197 ± 0.0004 0.118 0.014 TYP 6.0° 0.0° 0.021 ± 0.004 0.006 ± 0.002 Optimum Technology Matching® Applied Package Style: MSOP-10 üSi Bi-CMOS Si BJT Ga As HBT Si Ge HBT Ga As MESFET Si CMOS Features - Single Supply 3.0V Operation - +8.5d Bm Output P1d B - +19d Bm Output IP3 - Power Down Control - 23d B Conversion Gain IF+ 1 IF- 2 GND1 3 LO 4 GND2 5 10 VCC 9 PD 8 GND3 7 RF GND 6 RF OUT Ordering Information RF2640 RF2640 PCBA 3V 900MHz Upconverter/ Driver Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://.rfmd. Rev A3 010717 6-37 MIXERS Absolute Maximum Ratings Parameter Supply Voltage Input RF Power Operating Ambient Temperature Storage Temperature Preliminary Rating -0.5 to +3.6 +3 -30 to +80 -30 to +150 Unit VDC d Bm °C °C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described...