Datasheet4U Logo Datasheet4U.com

BD95602MUV - 2ch Synchronous Buck DC/DC Controller

General Description

BD95602MUV is a dual buck regulator controller with adjustable output voltage from1.0V to 5.5V and an input voltage range of 5.5 to 28V.

High efficiency is achieved with an external synchronous Nch-MOSFET.

Key Features

  • Adjustable Simple Light Load Mode (SLLM), Quiet light Load Mode (QLLM), Forced continuous Mode.
  • Multifunctional Protection Circuit -Settable Over Current Protection (OCP) -Thermal Shut down (TSD) -Under Voltage Lock Out (UVLO) -Over Voltage Protection (OVP) -Short Circuit Protection with Timer-Latch (SCP).
  • 150kHz to 500kHz Switching frequency.
  • Adjustable Soft Start.
  • Power Good.
  • Dual Linear Regulator (5V/3.3V (total 50mA)).
  • Output Discharge.
  • Referenc.

📥 Download Datasheet

Datasheet Details

Part number BD95602MUV
Manufacturer ROHM
File Size 1.55 MB
Description 2ch Synchronous Buck DC/DC Controller
Datasheet download datasheet BD95602MUV Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD956 Silicon PNP Power Transistor Inchange Semiconductor
BD956 PNP PLASTIC POWER TRANSISTOR CDIL
BD956F Silicon PNP Power Transistor Inchange Semiconductor
BD950 Silicon PNP Power Transistor Inchange Semiconductor
BD950 PNP PLASTIC POWER TRANSISTOR CDIL

Other Datasheets by ROHM

Part Number Description
BD95602MUV-LB dual buck regulator controller
BD95601MUV-LB 1ch Synchronous Buck DC/DC Controller
BD950N5EFJ-C LDO Regulators
BD950N5FP-C LDO Regulators
BD950N5FP2-C LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet 5.5V to 28V Input, 2ch Synchronous Buck DC/DC Controller BD95602MUV General Description BD95602MUV is a dual buck regulator controller with adjustable output voltage from1.0V to 5.5V and an input voltage range of 5.5 to 28V. High efficiency is achieved with an external synchronous Nch-MOSFET. H3RegTM, Rohm’s advanced proprietary control method that uses constant on-time control to provide ultra high transient responses to load changes is used. SLLM(Simple Light Load Mode) technology is added to improve efficiency with light loads giving high efficiency over a wide load range. In addition to the dual buck regulator controllers, here are 2 LDO regulators included that are fixed output voltage of 3.3V and 5.0V.