BV1HL045EFJ-C
BV1HL045EFJ-C is 1ch High-Side Switch manufactured by ROHM.
Automotive IPD Series
Built-in Output Diagnosis 1ch High Side Switch
General Description BV1HL045EFJ-C is a 1ch high side switch for automotive application. It has a built-in overcurrent limit function, thermal shutdown protection function, open load detection function, low power output-OFF function and short-to-VCC detection function. It is equipped with diagnostic output function for abnormality detection.
Features
- Built-in Dual TSD(Note 1)
- AEC-Q100 Qualified(Note2)
- Built-in Overcurrent Protection Function (OCP)
- Built-in Thermal Shutdown Protection Function(TSD)
- Built-in Open Load Detection Function
- Built-in Short-to-VBB Detection Function
- Built-in Low Voltage Output OFF Function (UVLO)
- Built-in Reverse Battery Connection Protection
- Built-in Diagnostic Output
- Low On-Resistance Single Nch MOSFET Switch
- Monolithic power management IC with control unit (CMOS)and power MOSFET mounted on a single chip
(Note 1) Two type of built-in temperature protection: Junction temperature, and ΔTj protection that detects sudden temperature rise of the Power-MOS (Note 2) Grade 1
Key Specifications
- Power Supply Operating Range
- ON-Resistance (Tj=25°C)
- Overcurrent Limit
- Standby Current (Tj=25°C)
- Active Clamp Tolerance (Tj=25°C)
6 V to 28 V 45 mΩ(Typ)
2.5 A(Min) 0.5 µA(Max)
120m J
Package HTSOP-J8
W (Typ) x D (Typ) x H(Max) 4.9mm x 6.0mm x 1.0mm
Application
- Resistance load, inductance load and capacitance load for automotive application
Typical Application...
