Renesas Electronics ICS1893
The ICS1893 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards. The ICS1893 architecture is based on the ICS1892. The ICS1893 supports managed or unmanaged node, repeater, and switch applications.| Part No. | ICS1893 |
|---|---|
| Datasheet | ICS1893 Download |
| Manufacturer |  Renesas Electronics |
| Description | 3.3-V 10Base-T/100Base-TX Integrated PHYceiver |
| Buy | Stock & Price |
FEATURES
● Supports category 5 cables with attenuation in excess of 24 dB at 100 MHz across a temperature range from -5°to +85°C● DSP-based baseline wander correction to virtually eliminate killer packets across temperature range of from -5°to +85°C
● Low-power, 0.35-micron CMOS (typically 400 mW)
● Single 3.3-V power supply.
● Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers of IEEE standard
● 10Base-T and 100Base-TX IEEE 802.3 compliant
● Fully integrated, DSP-based PMD includes: – Adaptive equalization and baseline wander correction – Transmit wave shaping and stream cipher scrambler – MLT-3 encoder and NRZ/NRZI encoder
● Highly configurable design supports: – Node, repeater, and switch applications – Managed and unmanaged applications – 10M or 100M half- and full-duplex modes – Parallel detection – Auto-negotiation, with Next Page capabilities
● MAC/Repeater Interface can be configured as: – 10M or 100M Media Independent Interface – 100M Symbol Inter...
