Datasheet4U Logo Datasheet4U.com

ISL54226 - High-Speed USB 2.0 (480Mbps) DPST Switch

General Description

µTQFN 4 5 6 7 8 1 2 3 - PIN TDFN NAME DESCRIPTION 1 INT Charger Mode Interrupt Output 2 D+ USB Data Port 3 COM+ USB Data Port 4 GND Ground Connection 5 COM- USB Data Port 6 D- USB Data Port 7 OE/ALM Switch Enable/Alarm (Open Drain) Drive Low to Open Switches Outputs are Low when OVP

Key Features

  • High-speed (480Mbps) and full-speed (12Mbps) signaling capability per USB 2.0.
  • 1.8V logic compatible (2.7V to +3.6V supply).
  • OE/ALM pin to open all switches and indicate overvoltage fault condition.
  • Charger interrupt indicator output.
  • Power OFF protection.
  • COM pins overvoltage protection for +5.25V and -5V fault voltages.
  • -3dB frequency.
  • . 790MHz.
  • Low ON capacitance @ 240.

📥 Download Datasheet

Datasheet Details

Part number ISL54226
Manufacturer Renesas
File Size 801.82 KB
Description High-Speed USB 2.0 (480Mbps) DPST Switch
Datasheet download datasheet ISL54226 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET ISL54226 High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection FN7614 Rev 2.00 Aug 15, 2016 The ISL54226 is a single supply, dual SPST (Single Pole/Single Throw) switch that is configured as a DPST. It can operate from a single 2.7V to 5.25V supply. The part was designed for switching or isolating a USB high-speed source or a USB high-speed and full-speed source in portable battery powered products. The 3.5ΩSPST switches were specifically designed to pass USB full speed and USB high-speed data signals. They have high bandwidth and low capacitance to pass USB high-speed data signals with minimal distortion.