ISL88694
ISL88694 is SMBus Accelerator (SMA) manufactured by Renesas.
feature makes the switching behavior invariant for all power supply voltages between 2.7V and 5.5V.
A noise filter on each channel prevents the circuit from responding to input transitions that do not exceed a voltagetime threshold. To activate the boost circuit, the input must exceed VTRIPL by 100Vns (typical) (See Figure 10).
The SMA permits operation of the bus at frequencies up to 100k Hz, despite the capacitive loads of multiple devices and/or long PC board traces. Enhanced ESD protection on the accelerator pins are guaranteed to withstand 8k V ESD (HBM) events.
The SMBus Accelerator provides an essential function in SMBus applications because of distributed capacitance of SMBus and multiple device input capacitances at various nodes. By incorporating SMA, systems using SMBus or I2C can reliably increase their bus load without the risk of data loss.
FN8239 Rev.2.00 Jan 25, 2019
Features
- Active termination for SMBus lines
- Enhances system bus signal rise time
- Increases bus capacity while ensuring data integrity
- 2.2m A rise time supply current
- 8k V ESD protection on SDA and SCL pins
- Wide operating voltage range: 2.7V to 5.5V
- 2-Wire SMBus and I2C patible (100k Hz)
- Small package
- SOT23-5
- Pin-for-pin patible with the LTC1694
- Pb-free available (Ro HS pliant)
Target Applications
- Servers
- Data acquisition
- Routers
- Battery chargers
- Portable instrumentation
- Notebook
- PC
- Facilities tracking system
Related Literature
For a full list of related documents, visit our website:
- ISL88694 device page
FN8239 Rev.2.00 Jan 25, 2019
Page 1 of 10
Ordering Information
PART NUMBER PART MARKING
(Notes 2, 3)
(Note 4)
TEMP RANGE (°C)
TAPE AND REEL (Units) (Note 1)
PACKAGE (Ro HS pliant)
PKG. DWG. #
ISL88694IH5Z-TK...
