ISL89367 Overview
Internal timers can be programmed with resistors to delay the rising and/or falling edges of the outputs. Logically ANDed dual inputs are also provided. One input is for the PWM signal and the second can be used as an enable.
ISL89367 Key Features
- 2 outputs with 6A peak drive currents (sink and source) with output voltage range of 4.5V to 16V
- Typical ON-resistance <1Ω
- Specified Miller plateau drive currents
- EPAD provides very low thermal impedance (JC = 3°C/W)
- Dual logic inputs with hysteresis for high noise immunity
- 20ns rise and fall time driving a 10nF load
- Flexible logic options available by use of INVA and INVB pins
ISL89367 Applications
- 2 outputs with 6A peak drive currents (sink and source) with output voltage range of 4.5V to 16V