Datasheet4U Logo Datasheet4U.com

ISL90460 - Digitally Controlled Potentiometer

Description

SOT-23/SC-70 5-PIN SYMBOL DESCRIPTION 1 VDD Supply voltage RH 2 GND Ground 3 U/D Up - Down 4 CS Chip select 5 RH High terminal/Wiper terminal GND (GROUND) GENERAL FN8225 Rev 4.00 October 22, 2015 Page 2 of 8 ISL90460 Absolute Maximum Ratings Storage Temperature

Features

  • Volatile Solid-State Potentiometer.
  • 2-pin UP/DN Interface.
  • DCP Terminal Voltage, 2.7V to 5.5V.
  • Tempco 35ppm/°C Typical.
  • 32 Wiper Tap Points.
  • Low Power CMOS - Active current 25µA max. - Supply current 0.3µA.
  • Available RTOTAL Values = 10k50k100k.
  • Temp Range -40°C to +85°C.
  • Packages - 5 Ld SC-70, SOT-23.
  • Pb-Free Plus Anneal Available (RoHS Compliant) Pinout ISL90460 (5 LD SOT-23, SC-70) TOP VIEW VDD.

📥 Download Datasheet

Datasheet preview – ISL90460

Datasheet Details

Part number ISL90460
Manufacturer Renesas
File Size 415.81 KB
Description Digitally Controlled Potentiometer
Datasheet download datasheet ISL90460 Datasheet
Additional preview pages of the ISL90460 datasheet.

📁 Similar Datasheet

  • ISL9000AM - Dual LDO (Intersil)
  • ISL9008 - Low Noise LDO (Intersil)
  • ISL90840 - XDCP (Intersil)
  • ISL90843 - Quad Digital Controlled Potentiometers (Intersil Corporation)
  • ISL9203 - Li-ion/Li Polymer Battery Charger (Intersil Corporation)
  • ISL9220B - Switching Charger (Intersil Corporation)
  • ISL94200 - Multi-Cell Li-ion Battery Pack OCP/Analog Front-End (Intersil)
  • ISL94201 - Multi-Cell Li-ion Battery Pack Analog Front-End (Intersil)
  • ISL9443 - Synchronous Step-Down PWM Controller (Intersil)
  • ISL9502 - Two-Phase PWM Controller (Intersil)
Other Datasheets by Renesas

Full PDF Text Transcription

Click to expand full text
NOT RECOMMENDED FOR NEW DESIGNS POSSIBLE SUBSTITUTE PRODUCT ISL90461, ISL90462, ISL23511 ISL90460 Single Volatile 32-Tap XDCP™ Digitally Controlled Potentiometer (XDCP) DATASHEET FN8225 Rev 4.00 October 22, 2015 The Intersil ISL90460 is a digitally controlled potentiometer (XDCP). Configured as a variable resistor, the device consists of a resistor array, wiper switches, a control section, and volatile memory. The wiper position is controlled by a 2-pin Up/Down interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS and U/D inputs.
Published: |