ISL9301 Datasheet | Renesas

feature allows the system to immediately operate with a pletely discharged battery. This feature also allows the charge to terminate when the battery is full while continuing to supply the system with the input source, thus minimizing unnecessary charge/discharge cycles and improving the battery life. Two indication pins (PPR and CHG) allow simple interface to a microprocessor or LEDs. Ordering Information PART TEMP. NUMBER PART RANGE (Notes 1, 2, 3) MARKING (°C) PACKAGE (Pb-Free) PKG. DWG. # ISL9301IRZ 9301 -40 to +85 10 Ld 3x3 DFN L10.3x3C ISL9301IRZ-T 9301 -40 to +85 10 Ld 3x3 DFN L10.3x3C NOTES: 1. Please refer to TB347 for details on reel specifications. 2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding pounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is Ro HS pliant and patible with both Sn Pb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3. For Moisture Sensitivity Level (MSL), please see device information page for ISL9301. For more information on MSL, please see Technical Brief TB363. Features - plete Charger for Single-Cell Li-ion/Polymer Batteries - Power Path Management Optimize Charge and System Currents - Intelligent Timeout Interval Based on Actual Charge Current - Integrated Disconnect Switch to Disconnect the Battery - 1% Charger Output Voltage Accuracy - Programmable Charge Current - Programmable End-of-Charge Current - Charge Current Thermal Foldback for Thermal Protection - Trickle Charge for Fully Discharged Batteries - 28V Maximum Voltage at VIN pin - Power Presence and Charge Indications - Ambient Temperature Range: -40°C to +85°C - 10...