R7S910016CBG Datasheet | Renesas

Features - On-chip 32-bit ARM Cortex-R4F processor - High-speed realtime control with maximum operating frequency of 450/600 MHz Capable of 747/996 DMIPS (in operation at 450/600 MHz) - On-chip 32-bit ARM Cortex-R4F (revision r1p4) - Tightly coupled memory (TCM) with ECC: 512 Kbytes/32 Kbytes - Instruction cache/data cache with ECC: 8 Kbytes per cache - High-speed interrupt - The FPU supports addition, subtraction, multiplication, division, multiply-and-accumulate, and square-root operations at singleprecision and double-precision. - Harvard architecture with 8-stage pipeline - Supports the memory protection unit (MPU) - ARM Core Sight architecture, includes support for debugging through JTAG and SWD interfaces - (Oinn-pcrhoidpu3c2ts-biint c Ao Rrp Mo Craotrintegxa-Mn3Rp-Ir Noceensgsinoer ) - 150-MHz operating frequency - On-chip 32-bit ARM Cortex-M3 (revision r2p1) - RISC Harvard architecture with 3-stage pipeline - Supports the memory protection unit (MPU) - Low power consumption - Standby mode, sleep mode, and module stop function - On-chip extended SRAM - Up to 1 Mbyte of the on-chip extended SRAM with ECC - 150 MHz - Data transfer - DMAC: 16 channels × 2 units - DMAC for the Ethernet controller: 1 channel - Event link controller - Module operations can be started by event signals rather than by interrupt handlers. - Linked operation of modules is available even while the CPU is in the sleep state. - Reset and power supply voltage control - Four reset sources including a pin reset - Dual power-voltage configuration: 3.3 V (I/O unit), 1.2 V (internal) - Clock functions - External clock/oscillator input frequency: 25 MHz - CPU clock frequency: Up to 450/600 MHz - Low-speed on-chip oscillator (LOCO): 240 k Hz - Independent watchdog timer - Operated by a clock signal obtained by frequency-dividing the clock signal from the low-speed on-chip oscillator: Up to 120 k Hz - Safety functions - Register write protection, input clock oscillation stop detection, CRC, IWDTa, and A/D...