RT4831A Datasheet | Richtek

Description The RT4831A is an integrated four-channel backlight WLED driver with LCD bias supply for portable device. The backlight WLED driver supports up to 4P8S WLED configuration. Meanwhile, the driver maximum acceptable output voltage is 29V. Each channel current is controlled by the I2C interface and/or the external PWM input to achieve 11 bit LED current steps from 60A to 30m A in exponential or linear mapping curves. The LCD bias supply is implemented with a Boost, a LDO and an inverting charge pump to provide positive and negative voltage. The LCD bias provides up to 150m A output current and the output voltage can be programmed via I2C interface from ±4V to ±6.5V with 50m V/step. The RT4831A is available in a WL-CSP24B 1.84x2.68 (BSC) package. Ordering Information Package Type WSC : WL-CSP-24B 1.84x2.68 (BSC) Note : Richtek products are : - Ro HS pliant and patible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in Sn Pb or Pb-free soldering processes. Features System - Hardware Enable Pin - I2C Controlled Interface - Over-Temperature Protection Backlight WLED Driver - 2.7V to 5V Input Voltage Range - Drives Up to 4P8S WLED Configuration (29V Maximum Output Voltage) - External PWM Input and I2C Brightness Control - 11 Bit Exponential and Linear Dimming Control - Programmable Over-Voltage Protection - Programmable Over-Current Protection - Auto Operating Frequency (250k Hz, 500k Hz, 1MHz) - WLED Current Ramp Up / Ramp Down Smoothen LCD Bias Supply - 2.7V to 5V Input Voltage Range - Programmable Positive / Negative Output Voltage from ±4V to ±6.5V with 50m V/Step - Programmable Boost Output Voltage from 4V to 7.15V with 50m V/Step - 150m A Output Current Capability - Output Short-Circuit Protection Applications - LCD Panels with up to 32 LEDs - Smartphone - Tablet Copyright © 2020 Richtek Technology Corporation. All rights reserved. DS4831A-05 July 2020 is a registered trademark of Richtek Technology Corporation. .richtek....