RT7755GEK Datasheet | Richtek

Description The RT7755GEK series is specifically designed to work with controllers, such as the RT7206, to provide a total solution for USB PD or a programmable power adapter. This RT7755GEK not only provides a high power efficiency control scheme, but also gives a 50m W very low standby power control under 5V standby condition. The RT7755GEK is such a special design to achieve a wide-range of output voltage by utilizing several innovations, including (1) By using DMAG pin, the RT7755GEK senses output voltage to adjust loop gain for system stability, to adjust output over-voltage protection threshold voltage to protect external devices, and to adjust current limit to meet Limited Power Source (LPS) safety requirements; (2) The RT7755GEK is also equipped with prehensive protection features , including bulk-capacitor brown-in/brown-out protection, VDD over-voltage protection (VDD OVP), output overvoltage/under-voltage protection (Output OVP/UVP), secondary rectifier short-circuit protection (SRSP), and external over-temperature protection (External OTP); (3) For constant output power regulation, a resistor connected to CS pin can be used to achieve accurate line pensation across the universal input voltage range; and (4) The RT7755GEK also provides various features to protect against any failures occurring at the secondary-side ponent, such as the RT7206 or a shunt regulator. In applications, it is suggested that the RT7755GEK be used with a secondary controller RT7206 to realize a robust and safe design to prevent all potential fault conditions due to misconnection of various devices, cables, plugs and receptacles. Features - Optimized for Adaptive Output Power - Wide VDD Range : 9V to 64V - Adaptive Output Over-Voltage Protection - Adaptive Over-Current Protection - Adaptive Loop Gain Control for Loop Stability - High Efficiency - Green Mode Operation at Light Load and No Load - prehensive Protection Features - Bulk-Capacitor Brown-In and Brown-Out Protection - VDD...