ACS8525 Datasheet PDF | Semtech Corporation

Semtech Corporation ACS8525

The ACS8525 is a highly integrated, single-chip solution for “Hit-less” protection switching of SEC (SDH/SONET Equipment Clock) + Sync clock “Groups”, from Master and Slave SETS clock cards and a third (Stand-by) source, for Line Cards in a SONET or SDH Network Element. The ACS8525 has fast activity monitors on the SEC clock inputs and will implement automatic system protection switching against the Master clock failure. The selection of the Master/Slave input can be forced by a Force Fast Switch pin.

Part No.	ACS8525
Datasheet	ACS8525 Download
Manufacturer	Semtech Corporation
Description	Line Card Protection Switch
Buy	Stock & Price

DESCRIPTION

FINAL

FEATURES

DATASHEET ACS8525 LC/P If both the Master and Slave input clocks fail, the Stand-by “Group” is selected or, if no Stand-by is available, the device enters Digital Holdover mode. The ACS8525 can perform frequency translation, converting, for example, an 8 kHz SEC input clock from a backplane into a 155.52 MHz clock for local line cards. Master and Slave SEC inputs to the device support TTL/CMOS and PECL/LVDS. The Stand-by SEC and three Sync inputs are TTL/CMOS only. The ACS8525 generates two SEC clock outputs, via one PECL/LVDS and one TTL/CMOS port, with spot frequencies from 2 kHz up to 311.04 MHz (up to 155.52 MHz on the TTL/CMOS port). It also provides an 8 kHz Frame Sync and a 2 kHz Multi-Frame Sync signal output with programmable pulse width and polarity. The ACS8525 includes a Serial Port, which can be SPI compatible, providing access to the configuration and status registers for device setup. IEEE 1149.1 JTAG Boundary Scan is supported. Block Diagram F...