SGM4064 Datasheet | SG Micro

DESCRIPTION The SGM4064 is a charger front-end integrated circuit designed to provide protection to Li-Ion batteries from failures of the charging circuitry. The IC continuously monitors the input voltage and the battery voltage. The device operates like a linear regulator, maintaining a 5.1V output with input voltages up to the input over-voltage threshold (VOVP = 6.8V). During input over-voltage conditions, the IC immediately turns off the internal pass FET disconnecting the charging circuitry from the damaging input source. Additionally, if the battery voltage rises to unsafe levels while charging, power is removed from the system. The IC also monitors its die temperature and switches off if it exceeds 145 ℃ . When the IC is controlled by a processor, the IC provides status information about fault conditions to the host. The SGM4064 is available in Green TDFN-2×2-8L package and is rated over the -40 ℃ to +85 ℃ temperature range. FEATURES - Input Over-Voltage Protection - Accurate Battery Over-Voltage Protection - Soft-Start to Prevent Inrush Currents - Soft-Stop to Prevent Voltage Spikes - 18V Maximum Input Voltage - Supports up to 1.5A Load Current - Thermal Shutdown - Enable Function - Fault Status Indication - Available in Green TDFN-2×2-8L Package APPLICATIONS Smart Phones, Mobile Phones PDAs MP3 Players Low-Power Handheld Devices APPLICATION SCHEMATIC Adapter CIN 2.2μF VBAT RILIM ILIM VSS Charging Circuit COUT 2.2μF SYSTEM SG Micro Corp .sg-micro. OCTOBER 2017 - REV. A. 2 Over-Voltage Protection IC and Li+ Charger Front-End Protection IC with LDO Mode PACKAGE/ORDERING INFORMATION MODEL SGM4064 PACKAGE DESCRIPTION TDFN-2×2-8L SPECIFIED TEMPERATURE RANGE...