Datasheet4U Logo Datasheet4U.com

STLC5444 - QUAD FEEDER POWER SUPPLY

Description

The ISDN Quad Feeder Power Supply (IQFPS) provides a power source for up to four line interfaces.

The power source to the device is a local battery or a centralized regulated power supply.

It can operate in point-to-point and point-to-multipoint configurations as far as S interface is concerned.

📥 Download Datasheet

📁 Similar Datasheet

  • STLC2690 - Bluetooth and FM transceiver system-on-chip (STMicroelectronics)
  • STLC4560 - Single chip 802.11b/g WLAN radio (STMicroelectronics)
  • STLC8100 - DUAL BAND WIRELESS LAN RF TRANSCEIVER (STMicroelectronics)
  • STL-S3 - Stratum 3 Timing Module (Connor-Winfield)
  • STL-S3E - Stratum 3E Timing Module (Connor-Winfield)
  • STL03S03F - (STL03S03F - STL15S15F) 2W Single Output Surface Mount DC-DC Converter (Superworld Electronics)
  • STL03S05F - (STL03S03F - STL15S15F) 2W Single Output Surface Mount DC-DC Converter (Superworld Electronics)
  • STL03S09F - (STL03S03F - STL15S15F) 2W Single Output Surface Mount DC-DC Converter (Superworld Electronics)
  • STL03S12F - (STL03S03F - STL15S15F) 2W Single Output Surface Mount DC-DC Converter (Superworld Electronics)
  • STL03S15F - (STL03S03F - STL15S15F) 2W Single Output Surface Mount DC-DC Converter (Superworld Electronics)
Other Datasheets by ST Microelectronics
  • STLC5445 - QUAD LINE FEED CONTROLLER
  • STLC5411 - 2B1Q U INTERFACE DEVICE
  • STLC5412 - 2B1Q U INTERFACE DEVICE ENHANCED WITH DECT MODE
  • STLC5432 - 2Mbit CEPT & PRIMARY RATE CONTROLLER DEVICE
  • STLC5460 - LINE CARD INTERFACE CONTROLLER
  • STLC5464 - MULTI-HDLCWITH n x 64 SWITCHING MATRIX ASSOCIATED
  • STLC5465B - MULTI-HDLCWITH n x 64 SWITCHING MATRIX ASSOCIATED
  • STLC5466 - 64 CHANNEL-MULTI HDLC WITH N X 64KB/S SWITCHING MATRIX ASSOCIATED

Full PDF Text Transcription

Click to expand full text
STLC5444 QUAD FEEDER POWER SUPPLY SUPPLIES POWER FOR UP TO FOUR DIGITAL TELEPHONE LINES CONFORMS TO THE CCITT RECOMMENDATIONS FOR POWER FEED AT THE S OR T REFERENCE POINTS SUPPORTS POINT-TO-POINT AND POINT TO MULTIPOINT CONFIGURATIONS EACH OF THE FOUR LINES IS INDIVIDUALLY CONTROLLED HIGH-VOLTAGE BCD TECHNOLOGY SUPPORTING UP TO -130V AUTOMATIC THERMAL SHUTDOWN STATUS CONDITION DETECTION (BY MICROPROCESSOR) FOR EACH LINE: – Low output voltage – Openloop – Current overload – Thermal overload – Normal line condition PROGRAMMABLE CURRENT LIMITING OUTPUT CURRENT UP TO 120mA DESCRIPTION The ISDN Quad Feeder Power Supply (IQFPS) provides a power source for up to four line interfaces. The power source to the device is a local battery or a centralized regulated power supply.
Published: |