STLV3243E Datasheet | STMicroelectronics

.. ±15KV ESD PROTECTED 2.3 TO 5.5V, 400KBPS, RS-232 TRANSCEIVER WITH AUTO-POWERDOWN I I I I I ESD PROTECTION FOR RS-232 I/O PINS: ±8KV IEC 1000-4-2 CONTACT DISCHARGE ±15KV HUMAN BODY MODEL 1µA SUPPLY CURRENT ACHIEVED WHEN IN AUTO-POWERDOWN 250Kbps MINIMUM GUARANTEED DATA RATE GUARANTEED 6V/µs SLEW RATE RANGE GUARANTEED MOUSE DRIVEABILITY 0.1µF EXTERNAL CAPACITORS MEET EIA/TIA-562 SPECIFICATIONS AVAILABLE IN FLIP-CHIP28 PACKAGES Flip-Chip28 DESCRIPTION The STLV3243E device consists of 3 drivers, 5 receivers and a dual charge-pump circuit. All transmitter outputs and receiver inputs are protected up to ±8KV USING IEC 1000-4-2 contact discharge and ±15KV using the Human Body Model. The receiver R2 is always active to implement a wake-up feature for serial port. The device is guaranteed to run at data rates of 250kbps while maintaining RS-562 output levels. The Auto-powerdown feature operates when FORCEON is low and FORCEOFF is high. During this operation mode, if the device does not sense a valid RS-562 signal, the driver outputs are Table 1: Order Codes Type STLV3243EBJR Temperature Range -40 to 85 °C disabled. If FORCEOFF is set low, both drivers and receivers (expert R2B) are shut off, and supply current is reduced to 1µA. Disconnecting the serial port or turning off the peripheral drives causes the auto-powerdown condition to occur. Auto-powerdown can be disabled when FORCEON and FORCEOFF are high, and this should be done when driving a serial mouse. With Auto-powerdown enabled, the device is automatically activated when a valid signal is applied to any receiver input. Typical applications are notebooks, PDAs, smart-phones, hand-held equipment, palmtop puters, peripherals, battery-powered equipment, and printers. Package FLIP-CHIP28 (6x5mm) ments 2500 parts per reel May 2005 Rev. 2 1/13 Table 2: Pin Description Pl N N° A1 A2 A3 A4 A5 A6 B1 B2 B3 B4 B5 B6 C1 C2 C5 C6 D1 D2 D3 D4 D5 D6 E1 E2 E3 E4 E5 E6...