IPS4260L Datasheet | STMicroelectronics

Features RDS(on) (typ.) IOUT VCC AMR 0.26 Ω 4 ch 0.5 A 1 ch 2.0 A 55 V - 8 V to 50 V operating voltage range - Four independent protected channels - VCC undervoltage lock-out - High speed operation (tr, tf < 1 μs) - Programmable load current limitation level by external resistor - Typical operating load current: 0.5 A (per channel) / 2 A (one channel) - Thermally independent junction overtemperature protections - Programmable non-dissipative short-circuit protection (cut-off) by external resistor - Open load (off-state) and short-to-ground activated by external pull-down resistors - Fast demagnetization of inductive loads with integrated catch diodes clamping turn-off transients - Ground and VCC wire break protection - VCC overvoltage protection - mon open load diagnostic - mon thermal shutdown and overload diagnostic - Per channel thermal shutdown diagnostic - Designed to meet IEC 61131-2 - Miniaturized HTSSOP20 package Applications - Programmable logic control - Industrial PC peripheral input/output - Numerical control machines - General low-side switch applications Description The IPS4260L is a monolithic high speed (FSW up to 250 k Hz) device, which can drive four independent capacitive, resistive or inductive loads with one side connected to supply voltage. The channels can be parallelized to reduce power dissipation. When connected to Vcc rail, four integrated catch diodes clamp the turn-off transients generated by inductive loads even with huge inductance; bined with proper external TVS connected to VCC or to GND the IC allows fast decay, too. Each channel is protected against overload or short circuit event: the intervention level can be set by an external resistor on ILIM pin . DS12305 - Rev 3 - April 2020 For further information contact your local STMicroelectronics sales office. .st. Built-in thermal shutdown protects the chip against overtemperature even in case of short-circuit. If enabled, the integrated cut-off protection...