Datasheet4U Logo Datasheet4U.com

M27W102 - 1 Mbit 64Kb x16 Low Voltage UV EPROM and OTP EPROM

General Description

The M27W102 is a low voltage 1 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable).

It is ideally suited for microprocessor systems requiring large data or program storage and is organized as 65,536 words by 16 bits.

Key Features

  • a 2 line control function which accommodates the use of multiple memory connection. The two line control function allows: a. the lowest possible memory power dissipation, b. complete assurance that output bus contention will not occur. For the most efficient use of these two control lines, E should be decoded and used as the primary device selecting function, while G should be made a common connection to all devices in the array and connected to the READ line from the system control bus. This en.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M2704 UV ERASABLE PROM SGS
M2708 UV ERASABLE PROM SGS
M270DAN01.0 Color TFT-LCD AUO
M270DAN01.1 Color TFT-LCD AUO
M270DAN01.2 Color TFT-LCD AUO

Other Datasheets by STMicroelectronics

Part Number Description
M27W101 1 Mbit 128Kb x8 Low Voltage UV EPROM and OTP EPROM
M27W016 16 Mbit 1Mb x16 3V Supply FlexibleROM Memory
M27W032 32 Mbit 2Mb x16 3V Supply FlexibleROM Memory
M27W064 64 Mbit 4Mb x16 3V Supply FlexibleROM Memory
M27W201 2 Mbit 256Kb x 8 Low Voltage UV EPROM and OTP EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M27W102 1 Mbit (64Kb x16) Low Voltage UV EPROM and OTP EPROM s 2.7V to 3.6V LOW VOLTAGE in READ OPERATION READ ACCESS TIME: – 70ns at VCC = 3.0V to 3.6V – 80ns at VCC = 2.7V to 3.6V 40 40 s s s PIN COMPATIBLE with M27C1024 LOW POWER CONSUMPTION: – 15µA max Standby Current – 15mA max Active Current at 5MHz 1 1 FDIP40W (F) PDIP40 (B) s s PROGRAMMING TIME 100µs/word HIGH RELIABILITY CMOS TECHNOLOGY – 2,000V ESD Protection – 200mA Latchup Protection Immunity PLCC44 (K) s ELECTRONIC SIGNATURE – Manufacturer Code: 0020h – Device Code: 008Ch Figure 1. Logic Diagram TSOP40 (N) 10 x 14 mm DESCRIPTION The M27W102 is a low voltage 1 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable).