Datasheet4U Logo Datasheet4U.com

M27W400 - 4 Mbit 512Kb x8 or 256Kb x16 Low Voltage UV EPROM and OTP EPROM

Datasheet Summary

Description

The M27W400 is a low voltage 4 Mbit EPROM offered in the two range UV (Ultra Violet Erase) and OTP (one time programmable).

It is ideally suited for microprocessor systems requiring large data or program storage.

It is organised as either 512 Kwords of 8 bit or 256 Kwords of 16 bit.

Features

  • a 2-line control function which accommodates the use of multiple memory connection. The two-line control function allows: a. the lowest possible memory power dissipation b. complete assurance that output bus contention will not occur. For the most efficient use of these two control lines, E should be decoded and used as the primary device selecting function, while G should be made a common connection to all devices in the array and connected to the READ line from the system control bus. This ens.

📥 Download Datasheet

Datasheet preview – M27W400

Datasheet Details

Part number M27W400
Manufacturer STMicroelectronics
File Size 140.09 KB
Description 4 Mbit 512Kb x8 or 256Kb x16 Low Voltage UV EPROM and OTP EPROM
Datasheet download datasheet M27W400 Datasheet
Additional preview pages of the M27W400 datasheet.

📁 Similar Datasheet

Other Datasheets by STMicroelectronics
  • M27W401 - 4 Mbit 512Kb x 8 Low Voltage UV EPROM and OTP EPROM
  • M27W402 - 4 Mbit 256Kb x16 Low Voltage UV EPROM and OTP EPROM
  • M27W016 - 16 Mbit 1Mb x16 3V Supply FlexibleROM Memory
  • M27W032 - 32 Mbit 2Mb x16 3V Supply FlexibleROM Memory
  • M27W064 - 64 Mbit 4Mb x16 3V Supply FlexibleROM Memory
  • M27W101 - 1 Mbit 128Kb x8 Low Voltage UV EPROM and OTP EPROM
  • M27W102 - 1 Mbit 64Kb x16 Low Voltage UV EPROM and OTP EPROM
  • M27W201 - 2 Mbit 256Kb x 8 Low Voltage UV EPROM and OTP EPROM

Full PDF Text Transcription

Click to expand full text
M27W400 4 Mbit (512Kb x8 or 256Kb x16) Low Voltage UV EPROM and OTP EPROM s 2.7 to 3.6V LOW VOLTAGE in READ OPERATION READ ACCESS TIME: – 80ns at VCC = 3.0 to 3.6V – 100ns at VCC = 2.7 to 3.6V 40 40 s s BYTE-WIDE or WORD-WIDE CONFIGURABLE 4 Mbit MASK ROM REPLACEMENT LOW POWER CONSUMPTION – Active Current 20mA at 8MHz – Stand-by Current 15µA 1 1 FDIP40W (F) PDIP40 (B) s s s s s PROGRAMMING VOLTAGE: 12.5V ± 0.25V PROGRAMMING TIME: 50µs/word ELECTRONIC SIGNATURE – Manufacturer Code: 20h – Device Code: B8h Figure 1. Logic Diagram PLCC44 (K) DESCRIPTION The M27W400 is a low voltage 4 Mbit EPROM offered in the two range UV (Ultra Violet Erase) and OTP (one time programmable). It is ideally suited for microprocessor systems requiring large data or program storage.
Published: |