VNH7013XP-E Datasheet | STMicroelectronics

Features Type RDS(on) Iout Vccmax 13 mΩ typ (per leg) 40 A 72 V(1) 1. Per leg: sum of the two BVdss (HSD + LSD); VCC > 36 V whole bridge must be switched off; - Maximum VCC voltage: 72 V - 10 V patible inputs - RDS(on) per leg: 13 mΩ typical - Embedded thermal sensor: -8.1 m V/°K - Very low stray inductance in power line Description The VNH7013XP-E is an automotive integrated H-bridge intended for a wide range of automotive applications driving DC motors. The device incorporates a dual channel and two single channel MOSFETs. All the devices are designed using STMicroelectronics® well known and proven proprietary VIPower® M0-S7 technology that allows to integrate in a package four different channels in H-bridge topology. This package, specifically designed for the harsh automotive environment offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. Power SSO-36 TP Table 1. Device summary Package Power SSO-36 TP Tube VNH7013XP-E Order codes Tape and reel VNH7013XPTR-E January 2012 Doc ID 022370 Rev 3 1/24 .st. Contents Contents 1 Block diagram and pin description - - - - - . . . . 5 2 Electrical specifications - - - - - - - . . . 7 2.1 Absolute maximum rating - - -...