STMicroelectronics VNQ690SP-E
The VNQ690SP-E is a monolithic device made by using| STMicroelectronics VIPower M0-3 Technology, intended for driving resistive or inductive loads with one side connected to ground. This device has four independent channels.| Part No. | VNQ690SP-E |
|---|---|
| Datasheet | VNQ690SP-E Download |
| Manufacturer |  STMicroelectronics |
| Description | QUAD CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
Type VNQ690SP-E RDS(on) 90mΩ (*) Figure 1. Package Iout 10A VCC 36V (*) Per each channel s OUTPUT CURRENT PER CHANNEL: 10A s CMOS COMPATIBLE INPUTS s OPEN LOAD DETECTION (OFF STATE) s UNDERVOLTAGE & OVERVOLTAGE n SHUT- DOWN s OVERVOLTAGE CLAMP s THERMAL SHUT-DOWN s CURRENT LIMITATION s VERY LOW STAND-BY POWER DISSIPATION s PROTECTION AGAINST: n LOSS OF GROUND & LOSS OF VCC s REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE 10 1 PowerSO-10 ™DESCRIPTION
This device has four independent channels. Built-in thermal shut down and output current limitation protect the chip from over temperature and short circuit. Table 2. Order Codes Package PowerSO-10™ Note: (**) See application schematic at page 9 Tube VNQ690SP-E Tape and Reel VNQ690SPTR-E Rev. 1 October 2004 1/20 VNQ690SP-E Figure 2. Block Diagram VCC OVERVOLTAGE UNDERVOLTAGE DEMAG 1 DRIVER 1 OUTPUT 1 ILIM1 INPUT 1 INPUT 2 INPUT 3 INPUT 4 STATUS STATUS DRIVER 4 DEMAG 2 DRIVER 2 OUTPUT 2 ILIM2 LOGIC DEMAG 3 DRIVER 3 OUTPUT 3 ILIM3 DEMAG 4 OVERTEMP.
