SP6015
SP6015 is Synchronous Rectifier Driver manufactured by SYNC POWER.
DESCRIPTION
The fundamental of SP6015 synchronous rectifier (SR) driver IC is based on our U.S. patented methods that utilize the principle of “prediction” logic circuit. The IC deliberates previous cycle timing to linear control the SR in present cycle by “predictive” algorithm that makes adjustments to the turn-off time, in order to achieve maximum efficiency and avoid crossconduction at the same time. Specially, SP6015 is designed for LLC applications, and variable switching frequency system . The SP6015 is a dual fast turn-off intelligent controller to drive two N-CH power MOSFETs in LLC resonant converters for synchronous rectification.
APPLICATIONS
- Storage area network power supplies
- Telemunication converters
- Embedded systems
- Industrial & mercial systems using high current processors
- Power converters to meet Lot 6 requirement
FEATURES
- Offers efficiency improvement over Schottky
Diode.
- Low Standby Power to meet DOE Lot 6
Requirement .
- Dual gate driver for N-channel MOSFET
- Drives all level Power MOSFET.
- Prediction gate timing control.
- Minimum MOSFET body diode conduction.
- Operating frequency up to 250 KHz.
- Synchronize to transformer secondary voltage waveform.
- Self detect DCM / CCM to enhance the performance under the variable switching frequency condition.
PIN CONFIGURATION (SOP-10) PART MARKING
2020/06/24 Ver 3
Page 1
Synchronous Rectifier Driver
TYPICAL APPLCATION CIRCUIT
PIN DESCRIPTION
Pin
Symbol
Timing
Pred
Adj
SYNC-2
MOSG-2
MOSG-1...
