SPE0512 - 2-Line ESD Protection Array

SYNC POWER

General Description

The SPE0512 are designed by TVS device that is to protect sensitive electronics from damage or latch-up due to ESD.

They are designed for use in applications where board space is at a premium.

Key Features

Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns).
Protects two I/O lines.
Working voltage: 5V.
Low leakage current.
Low operating and clamping voltages PIN.

📥 Download Datasheet

SPE0512 2-line esd protection array by SYNC POWER - Datasheet Preview

Datasheet Details

Part number	SPE0512
Manufacturer	SYNC POWER
File Size	455.35 KB
Description	2-Line ESD Protection Array
Datasheet	SPE0512 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SPE05M50T-A	Intelligent Power Module	SPE
SPE05M50T-AN	Intelligent Power Module / 5A 3-phase full bridge drive	SPE
SPE05M50T-C	Intelligent Power Module	SPE
SPE05M50T-C	Intelligent Power Module	JILIN SINO
SPE05M50T-CN	Intelligent Power Module / 5A 3-phase full bridge drive	SPE

Other Datasheets by SYNC POWER

Part Number	Description
SPE0511	Single-Line ESD Protection Array
SPE0514	4-Line ESD Protection Array
SPE0515	5-Line ESD Protection Array
SPE0504	4-Line ESD Protection Array
SPE0505	5-Line ESD Protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SPE0512 2-Line ESD Protection Array DESCRIPTION The SPE0512 are designed by TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE0512 will protect up to two lines, and may be used on lines where the signal polarities swing above and below ground. SPE0512 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE0512 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SOT-523 package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras.