SPE0592 Datasheet | SYNC POWER

Single-Line ESD Protection Array DESCRIPTION The SPE0592 is a bi-direction TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE0592 will protect single line, and may be used on line where the signal polarities swing above and below ground. SPE0592 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE0592 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small DFN1.0x0.6-2L package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook puters, and digital cameras. APPLICATIONS - Near Field munications - Cordless Phone - RF Signal ESD Protection - RF Switching, PA and Antenna ESD Protection - HDMI 1.2~2.1 - USB2.0/USB3.0 and Type C Features - Transient protection for data lines to IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) - Protects single I/O lines - Working voltage: 5V - Low leakage current - Low operating and clamping voltages PIN CONFIGURATION (DFN1.0x0.6-2L) PART MARKING 2020/06/18 Ver.5 Page 1 Single-Line ESD Protection Array ORDERING INFORMATION Part Number Package SPE0592DN2RGB DFN1.0x0.6-2L ※ SPE0592DN2RGB: Tape Reel ; Pb Free, Halogen Free Part Marking O ABSOULTE MAXIMUM RATINGS (TA=25℃ Unless otherwise...