S6A0032 - 16 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD

Description

is changed 0.2 E_RD: Active low signal for writing command in 6800 mode or high enable signal for reading command in 8080 mode.

→ E_RD: Active low signal for writing command or high enable signal for reading command in 6800 mode, low enable signal for reading command in 8080 mode.

Features

1 BLOCK.

Samsung semiconductor

📥 Download Datasheet

Datasheet Details

Part number	S6A0032
Manufacturer	Samsung semiconductor
File Size	361.89 KB
Description	16 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD
Datasheet	S6A0032 Datasheet
Additional preview pages of the S6A0032 datasheet.

📁 Similar Datasheet

S6A - 6 Amp Silicon Rectifier 50 to 1000 Volts (Micro Commercial Components)
S6A13 - Thyristor Silicon Planar Type (Toshiba)
S6AE101A - Energy Harvesting PMIC (Cypress Semiconductor)

Other Datasheets by Samsung semiconductor

S6A0031 - 8 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD
S6A0035 - 53 SEGMENT STATIC DRIVER
S6A0065 - 40 CH SEGMENT/COMMON DRIVER FOR DOT MATRIX LCD
S6A0069 - 40CH SEGMENT/COMMON DRIVER
S6A0070 - 80 SEG / 16 COM DRIVER & CONTROLLER FOR DOT MATRIX LCD
S6A0070 - 40 CH SEGMENT/COMMON DRIVER FOR DOT MATRIX LCD
S6A0071 - 32COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
S6A0072 - 16COM/40SEG DOT MATRIX LCD CONTROLLER & DRIVER

Full PDF Text Transcription

Click to expand full text

S6A0032 16 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD June. 1999. Ver. 0.5 Prepared by: Tae-Kwang, Park parktk@samsung.co.kr Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. S6A0032 PRELIMINARY SPEC. VER. 0.5 16 COM / 80 SEG DRIVER & CONTROLLER FOR STN LCD S6A0032 Specification Revision History Version 0.0 0.1 Original ECKON pad added POR circuit added Page 5: (4/5) x V0 → (3/5) x V0 (3/5) x V0 → (2/5) x V0 Page 6: E_RD signal description is changed 0.2 E_RD: Active low signal for writing command in 6800 mode or high enable signal for reading command in 8080 mode.

Published: Apr 7, 2005 |