Datasheet4U Logo Datasheet4U.com

LV8762T - Forward/Reverse H-bridge Driver

Features

  • Forward/reverse H-bridge motor driver: 1 channel.
  • IOmax = 1A.
  • Built-in current limiter.
  • Current limit mask function.
  • Built-in thermal protection circuit.
  • Alert signal output.
  • Single power supply.
  • Built-in short-circuit protection function (selectable from latch-type or auto reset-type). Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage Output peak current Output continuous current Logic input vo.

📥 Download Datasheet

📁 Similar Datasheet

  • LV8762T - Forward/Reverse H-bridge Driver (ON Semiconductor)
  • LV8760T - Forward/Reverse H-bridge Driver (ON Semiconductor)
  • LV8761V - Forward/Reverse H-bridge Driver (ON Semiconductor)
  • LV8702V - PWM Current Control High-efficient Stepper Motor Driver (ON Semiconductor)
  • LV8711T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)
  • LV8712T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)
  • LV8713T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)
  • LV8714TA - Dual Stepper Motor Driver (ON Semiconductor)
  • LV8726TA - Stepper Motor Pre-Driver (ON Semiconductor)
  • LV8727 - PWM Current Control Stepping Motor Driver (ON Semiconductor)
Other Datasheets by Sanyo Semicon Device
  • LV8760T - Forward/Reverse H-bridge Driver
  • LV8761V - Forward/Reverse H-bridge Driver
  • LV8711T - PWM Constant-Current Control Stepping Motor Driver
  • LV8712T - PWM Constant-Current Control Stepping Motor Driver
  • LV8713T - PWM Constant-Current Control Stepping Motor Driver
  • LV8727 - PWM Current Control Stepping Motor Driver
  • LV8731V - PWM Current Control Stepping Motor Driver
  • LV8732V - PWM Current Control Stepping Motor Driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr Ordering number : ENA1926 LV8762T Overview Bi-CMOS LSI Forward/Reverse H-bridge Driver The LV8762T is an 1ch H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a motor. The IC is optimal for use in driving brushed DC motors for office equipment. Features • Forward/reverse H-bridge motor driver: 1 channel • IOmax = 1A • Built-in current limiter • Current limit mask function • Built-in thermal protection circuit • Alert signal output • Single power supply • Built-in short-circuit protection function (selectable from latch-type or auto reset-type).
Published: |