LC8905V Overview
Data input with built-in amplifier (for coaxial or optical module input) Data input (for optical module input) Emphasis, input bi-phase, and validity flag output Power supply VCO gain control input VCO free-running setting input PLL low-pass filter setting Ground System clock selection input (384fs or 512fs) Reset input PLL error lock avoidance clock input Test input (Must be connected to ground in normal operation)...
LC8905V Key Features
- On-chip PLL circuit synchronizes with the transmitted IEC 958 and EIAJ CP-1201 format signal
- Provides 128fs, bit, and L/R clock outputs
- System clock can be selected to be either 384fs or 512fs
- Microprocessor interface code settings for different output types
- Input pin, emphasis output, input bi-phase data output, and validity flag output settings
- Audio data output format setting
- Channel status output (32-bit output for consumer products)
- Subcode Q output with CRC flags (80 bits)
- Start ID and shortening ID detection for DAT (Digital Audio Tape recorder) that use subcodes
- CMOS, single-voltage power supply
