Datasheet4U Logo Datasheet4U.com

MP60-F - KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE

General Description

The MP60 series of power modules are economical 49W (nominal) switching DC:DC converters with an integral connector designed to Intel Corporation’s Voltage Regulator Module specification for the Klamath Processor.

Key Features

  • Integral 40-pin header connector.
  • Programmable output voltage to suit processor (by.
  • VID code); adjustable from 1.8 to 3.5V Maximum output current 14A Efficiency >80% at full load Designed to specifications for Intel Klamath Processor voltage regulator module Fast transient response.

📥 Download Datasheet

Datasheet Details

Part number MP60-F
Manufacturer SEMTECH
File Size 20.85 KB
Description KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE
Datasheet download datasheet MP60-F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP6002 Monolithic Flyback/Forward DC-DC Converter MPS
MP6002DN Monolithic Flyback/Forward DC-DC Converter MPS
MP6003 Monolithic Flyback/SEPIC DC-DC Converter MPS
MP6003DN Monolithic Flyback/SEPIC DC-DC Converter MPS
MP6004 Primary-Side Regulated Flyback/Buck 80V DCDC Converter MPS

Other Datasheets by SEMTECH

Part Number Description
MP60-E PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE
MP60G VOLTAGE REGULATOR MODULE FOR INTEL ADVANCED PROCESSORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE October 27, 1997 MP60-F TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION: The MP60 series of power modules are economical 49W (nominal) switching DC:DC converters with an integral connector designed to Intel Corporation’s Voltage Regulator Module specification for the Klamath Processor. The module has additional monitoring functions for Power Good Signal, Output Enable and Upgrade Present. The output voltage can be set between 1.8V and 3.5V by means of a five bit voltage identification code, to support current and future versions of the Pentium® Pro, Klamath and OverDrive® processor variants. To power Pentium® Pro processors (VRM 8.0) use MP60-E.