Datasheet4U Logo Datasheet4U.com

RCLAMP0502N - Low Capacitance TVS Array

General Description

The RailClamp® series is a family of ultra low capacitance TVS arrays designed to protect high speed data interfaces.

Key Features

  • ‹ ESD protection for high-speed data lines to ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects two I/O lines and a power line Low capacitance: 0.3pF typical Low clamping voltage Solid-state silicon-avalanche technology RClamp0502N Mechanical Characteristics SLP1210N6 Package RoHs/WEEE Compliant Nominal Dimensions: 1.2 x 1.0 x 0.58 mm Lea.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP0502B Ultra Low Capacitance TVS Semtech
RCLAMP0504F Low Capacitance TVS Array Semtech
RClamp0504FB 5V TVS Semtech
RCLAMP0504M Low Capacitance TVS Diode Array Semtech
RCLAMP0504P Low Capacitance TVS Array Semtech

Other Datasheets by SEMTECH

Part Number Description
RCLAMP0502A Low Capacitance TVS Array
RCLAMP0503F TVS Array
RCLAMP0503N TVS Array
RCLAMP0504N TVS Array
RCLAMP0504S TVS Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - RailClamp® w w w . D a t a S h e e t 4 U . c o m Description The RailClamp® series is a family of ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). They are designed for use in applications where board space is at a premium. Each device requires less than 1.2mm2 of PCB area and will protect up to two high speed data lines. The monolithic design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. Each line has a typical capacitance of <0.