Datasheet4U Logo Datasheet4U.com

RCLAMP0504N - TVS Array

General Description

RailClamps are surge rated diode arrays designed to protect high speed data interfaces.

Key Features

  • ‹ ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 12A (8/20µs) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects four I/O lines Low capacitance: 3pF typical Low clamping voltage Low operating voltage: 5.0V Solid-state silicon-avalanche technology SLP2020P6 Package RoHS/WEEE Compliant Nominal Dimensions: 2.0 x 2.0 x 0.60 mm Lead Pitch: 0.65mm Lead Finis.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP0504F Low Capacitance TVS Array Semtech
RClamp0504FB 5V TVS Semtech
RCLAMP0504M Low Capacitance TVS Diode Array Semtech
RCLAMP0504P Low Capacitance TVS Array Semtech
RCLAMP0504P TVS Diode Leiditech

Other Datasheets by SEMTECH

Part Number Description
RCLAMP0504S TVS Array
RCLAMP0502A Low Capacitance TVS Array
RCLAMP0502N Low Capacitance TVS Array
RCLAMP0503F TVS Array
RCLAMP0503N TVS Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - RailClamp www.DataSheet4U.com Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. The unique design of the RClamp series devices incorporates eight surge rated, low capacitance steering diodes and a TVS in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components.