Datasheet4U Logo Datasheet4U.com

RCLAMP2402B - Ultra-Low Capacitance TVS

General Description

RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces.

Key Features

  • ‹ Transient protection for high-speed data lines to ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Designed to replace polymer TVS Protects up to two I/O lines Ultra-Low Line-to-Line capacitance (3.0GHz Low profile (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RClamp2431TQ 24V ESD Protection Semtech
RClamp2451ZA 24V ESD Protection Semtech
RClamp2261ZA 22V EOS Protection SEMTECH
RClamp2574N High Power TVS Semtech
RClamp2574NQ High Power TVS SEMTECH

Other Datasheets by SEMTECH

Part Number Description
RCLAMP2504N 2.5V & 3.3V TVS Arrays
RCLAMP2504P (RCLAMP2504P / RCLAMP3304P) 2.5V & 3.3V TVS Arrays
RCLAMP0502A Low Capacitance TVS Array
RCLAMP0502N Low Capacitance TVS Array
RCLAMP0503F TVS Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ultra-Low Capacitance TVS for ESD and CDE Protection PROTECTION PRODUCTS - RailClamp® www.DataSheet4U.com Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The RClampTM2402B has a typical capacitance of only 0.60pF (pin 1 to 2). This means it can be used on circuits operating in excess of 3GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge).