Datasheet4U Logo Datasheet4U.com

UCLAMP0502T - 2-Line ESD protection

General Description

The µClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Key Features

  • large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClampTM0502T is in a 3-pin, RoHS/WEEE compliant, SLP1006P3T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect two lines operating at.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
uClamp0511T TVS Diode Leiditech
uClamp0301PQ Low Voltage TVS SEMTECH
uClamp03321PQ 1-Line ESD & Surge Protection SEMTECH
uClamp0601ZV 1-Line ESD & Surge Protection SEMTECH
uClamp0761ZV 1-Line ESD & Surge Protection SEMTECH

Other Datasheets by SEMTECH

Part Number Description
UCLAMP0502P 2-Line ESD protection
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection
UCLAMP0504A 4-Line ESD protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Low Profile µClampTM www.DataSheet4U.com 2-Line ESD protection PROTECTION PRODUCTS - MicroClampTM Description The µClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClampTM0502T is in a 3-pin, RoHS/WEEE compliant, SLP1006P3T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.