UCLAMP0506A Datasheet PDF (5-Line ESD protection Array)

General Description

The μClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

They are designed for use in applications where board space is at a premium.

Each device requires less than 2.9mm2 of PCB area and will protect up to five lines.

Key Features

Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects five bidirectional I/O lines 1.7 x 1.7 x 0.6mm Ultra-small SC-89 package (1.7 0.6mm) 2 requires less than 2.9mm of PCB area Working voltage: 5V Low leakage current Low operating and clamping voltages Solid-state silicon-avalanche technology Mechanical Characteristics SC-89 (SOT-666) package RoHS / WEEE Compliant Molding compound.

Datasheet Details

Part number	UCLAMP0506A
Manufacturer	SEMTECH
File Size	214.83 KB
Description	5-Line ESD protection Array
Datasheet	UCLAMP0506A Datasheet

Part number

UCLAMP0506A

Manufacturer

SEMTECH

File Size

214.83 KB

Description

5-Line ESD protection Array

Datasheet

UCLAMP0506A Datasheet

Other Datasheets by SEMTECH

Part Number	Description
UCLAMP0506P	6-Line ESD protection Array
UCLAMP0506T	Low Profile Clamp 6-Line ESD Protection
UCLAMP0501H	1-Line ESD protection
UCLAMP0501P	1-Line ESD protection
UCLAMP0501T	1-Line ESD protection
UCLAMP0502P	2-Line ESD protection
UCLAMP0502T	2-Line ESD protection
UCLAMP0504A	4-Line ESD protection Array
UCLAMP0504T	Low Profile Clamp 4-Line ESD Protection
UCLAMP0505A	5-Line ESD protection Array

Part Number

Description

UCLAMP0506P

6-Line ESD protection Array

UCLAMP0506T

Low Profile Clamp 6-Line ESD Protection

UCLAMP0501H

1-Line ESD protection

UCLAMP0501P

1-Line ESD protection

UCLAMP0501T

1-Line ESD protection

UCLAMP0502P

2-Line ESD protection

UCLAMP0502T

2-Line ESD protection

UCLAMP0504A

4-Line ESD protection Array

UCLAMP0504T

Low Profile Clamp 4-Line ESD Protection

UCLAMP0505A

5-Line ESD protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

μClampTM www.DataSheet4U.com 5-Line ESD protection Array PROTECTION PRODUCTS - MicroClampTM Description The μClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. Each device requires less than 2.9mm2 of PCB area and will protect up to five lines. They are bidirectional devices and may be used on lines where the signal polarities swing above and below ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents.