Datasheet4U Logo Datasheet4U.com

UCLAMP0505A - 5-Line ESD protection Array

General Description

The µClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

They are designed for use in applications where board space is at a premium.

Each device requires less than 2.9mm2 of PCB area and will protect up to five lines.

Key Features

  • ‹ Transient protection for data lines to ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects five I/O lines 1.7 x 1.7 x 0.6mm Ultra-small SC-89 package (1.7 0.6mm) 2 requires less than 2.9mm of PCB area Working voltage: 5V Low leakage current Low operating and clamping voltages Solid-state silicon-avalanche technology Mechanical Characteristics SC-89 (SOT-666) package Molding compound flammability rating: UL 94V-0 Mar.

📥 Download Datasheet

Datasheet Details

Part number UCLAMP0505A
Manufacturer SEMTECH
File Size 222.46 KB
Description 5-Line ESD protection Array
Datasheet download datasheet UCLAMP0505A Datasheet

Other Datasheets by SEMTECH

Part Number Description
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection
UCLAMP0502P 2-Line ESD protection
UCLAMP0502T 2-Line ESD protection
UCLAMP0504A 4-Line ESD protection Array
UCLAMP0504T Low Profile Clamp 4-Line ESD Protection
UCLAMP0506A 5-Line ESD protection Array
UCLAMP0506P 6-Line ESD protection Array
UCLAMP0506T Low Profile Clamp 6-Line ESD Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
µClampTM www.DataSheet4U.com 5-Line ESD protection Array PROTECTION PRODUCTS - MicroClampTM Description The µClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. Each device requires less than 2.9mm2 of PCB area and will protect up to five lines. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents.