RClamp0521Z Datasheet | SEMTECH

PROTECTION PRODUCTS - Z-Pak TM Description Rail Clamp® TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook puters, and other portable electronics. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. RClamp®0521Z has a typical capacitance of only 0.35p F. This allows it to be used on circuits operating in excess of 5GHz without appreciable signal attenuation. RClamp0521Z is in a 2-pin SLP0603P2X3 package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm. Leads are finished with lead-free Ni Au. Each device will protect one line operating at 5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. The bination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and MP3 players. Dimensions Ultra Small RClamp® 1-Line ESD protection PRELIMINARY Features - High ESD withstand Voltage: +/-17k V (Contact) and +/- 25k V (Air) per IEC 61000-4-2 - Able to withstand over 1000 ESD strikes per IEC 61000-4-2 Level 4 - Ultra-small 0201 package - Protects one high-speed data line - Low reverse current: <10n A typical (VR=5V) - Working voltage: +/- 5V - Low capacitance: 0.35p F typical - Dynamic resistance: 0.90 Ohms (Typ) - Solid-state silicon-avalanche technology Mechanical Characteristics - SLP0603P2X3 package - Pb-Free, Halogen Free, Ro HS/WEEE pliant - Nominal Dimensions: 0.6 x 0.3 x 0.25 mm - Lead Finish: Ni Au - Molding pound flammability rating: UL 94V-0 - Marking : Marking code + dot matrix date code - Packaging : Tape and Reel Applications - HDMI 1.3 and HDMI 1.4 - USB 2.0 - MHL - LVDS Interfaces - FM...