Datasheet4U Logo Datasheet4U.com

SC905 - CDMA Cellular Phone Power Management IC

General Description

The SC905 is a power management integrated circuit (PMIC) designed for the latest CDMA chip sets.

The device provides four general purpose low dropout regulators (LDOs), and five low noise LDOs designed for analog circuits.

Key Features

  • 9 LDO Linear Regulators CORE: 1.35V - 2.90V @ 300mA ANA: 2.55V - 2.90V @ 200mA PAD: 1.35V - 2.90V @ 300mA RX: 2.55V - 2.90V @ 150mA TX: 2.55V - 2.90V @ 150mA TCXO: 2.55V - 2.90V @ 80mA PLL: 2.55V - 2.90V @ 80mA Camera: 1.35V - 2.90V @ 100mA Motor Drive: 1.35V - 2.90V @ 150mA I2C Interface for Microprocessor Control Less than 1μA Quiescent Current in Shutdown 65dB PSRR for Analog LDOs Over-Temperature Protection Power-On Control Optional Interface for Controlling Semtech Battery Chargers Small 5m.

📥 Download Datasheet

Datasheet Details

Part number SC905
Manufacturer SEMTECH
File Size 816.03 KB
Description CDMA Cellular Phone Power Management IC
Datasheet download datasheet SC905 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC900 Programmable Penta ULDO Semtech Corporation
SC9012 INFRARED REMOTE CONTROL TRANSMITTER Silan Semiconductors
SC9016-000 (SC9016-000 / SC9017-000) Fet Chip Mounting Capacit Alpha
SC9017-000 (SC9016-000 / SC9017-000) Fet Chip Mounting Capacit Alpha
SC902-2 LOW LOSS SUPER HIGH SPEED RECTIFIER Fuji Electric

Other Datasheets by SEMTECH

Part Number Description
SC905A CDMA Cellular Phone Power Management IC
SC900A Programmable Penta ULDO
SC908 Power Management IC
SC9301 Integrated FET Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CDMA Cellular Phone www.DataSheet4U.com IC Power Management POWER MANAGEMENT Description The SC905 is a power management integrated circuit (PMIC) designed for the latest CDMA chip sets. The device provides four general purpose low dropout regulators (LDOs), and five low noise LDOs designed for analog circuits. The VMOT LDO can be used as a general purpose regulator or as an adjustable motor drive output that can supply up to 150mA to drive a vibrator motor. Each LDOs enable and output voltage are controlled via the I2C bus. An optional three-wire interface compatible with Semtech battery charger ICs is also controlled via the I2C bus.