GP2W0001YP Overview
GP2W0001YP IrDA Data Sheet.
GP2W0001YP Key Features
- Built-in Photodiode
- Operating voltage 2.7 V to 5.5 V
- In circuit design, allow for the degradation of light emitting diode output that results from long continuous operation
- This product shall not contain the following materials, and these materials shall not be used in the production process
- Carbon Tetrachloride
- 1.1.1. Trichloroethane (Methylchloroform)
- Specific brominated flame retardants such as the PBBOs and PBBs are not used in this device
- Consider that 20 ms or more (at TA = 25°C, no input signal) is necessary to return from shut-down mode to ready operatio
- When there is considerable external stray light or a light source is located near the transceiver, or the detector face
- When the sensor is adopted in an IR munication system, it should be used according to the signal method specified by ‘Se