Datasheet4U Logo Datasheet4U.com

SAP14 - External power supply

Datasheet Summary

Description

The SAP14 is a power supply unit suitable for an E-Bus and has an output voltage of 12 V at a maximum of 1.3 A.

The housing offers space for four type SMT12 (transponder) and for a battery of up to 12 V, 17 Ah for VdS applications or up to 12 V, 17 Ah for non-VdS applications.

📥 Download Datasheet

Datasheet preview – SAP14

Datasheet Details

Part number SAP14
Manufacturer Siemens
File Size 1.27 MB
Description External power supply
Datasheet download datasheet SAP14 Datasheet
Additional preview pages of the SAP14 datasheet.

📁 Similar Datasheet

  • SAP10 - Darlington transistors with built-in temperature compensation diodes for audio amplifier applications (Sanken electric)
  • SAP1024B - Dot Matrix STN LCD Controller (Avant Electronics)
  • SAP10N - Darlington transistors with built-in temperature compensation diodes for audio amplifier applications (Sanken electric)
  • SAP10P - Darlington transistors with built-in temperature compensation diodes for audio amplifier applications (Sanken electric)
  • SAP15 - Darlington transistors (Sanken electric)
  • SAP15N - Darlington transistors with built-in temperature compensation diodes for audio amplifier applications (Sanken electric)
  • SAP15P - Darlington transistors with built-in temperature compensation diodes for audio amplifier applications (Sanken electric)
  • SAP16N - For Power Amplifier Power Transistor (Sanken Electric)
  • SAP16P - For Power Amplifier Power Transistor (Sanken Electric)
  • SAP08 - Darlington transistors with built-in temperature compensation diodes for audio amplifier applications (Sanken electric)
Other Datasheets by Siemens

    Full PDF Text Transcription

    Click to expand full text
    SAP14 External power supply Installation instructions Product description The SAP14 is a power supply unit suitable for an E-Bus and has an output voltage of 12 V at a maximum of 1.3 A. The housing offers space for four type SMT12 (transponder) and for a battery of up to 12 V, 17 Ah for VdS applications or up to 12 V, 17 Ah for non-VdS applications. At least one SMT12 must be fitted to use the cover tamper contact. Security z Keep this document for later reference. z Also follow the country-specific safety standards or regulations for project planning, operating and disposing of the product. z The device is always to be disconnected from the mains or battery prior to performing maintenance work or installing additional devices.
    Published: |